Solar Home System 60A Solar Charge Controller (QWP-SR-HP2460A)
$70
/piece
price excl.VAT
Negotiable
- Minimal order
- 100 pieces
Message Phone call
Product Specifications
--
Product Description
The solar charge controller is the most important part of the solar system. It is too intelligent and automatically to control the charge, discharge and load of the system. The performance of the controller can influence the stability of the system, especially the lifetime of Battery.
Solar Home System 60A Solar Charge Controller (QWP-SR-HP2460A)
Can be used for lithium batteries and with USB port. Charging program options forsealed, GEL and flooded lead-acid batteries and lithium batteries are available.
Other Models
Parameter Details
| Model | HP2430/2440 | HP2450/2460 | HP4830/4840 | Remarks | |||||||
| Rated current | 30A/40A | 50A/60A | 30A/40A | ||||||||
| System voltage | Automatic recognition of 12V/24V | Automatic recognition of 12V/24V/36V/48V | Default automatic identification | ||||||||
| Manual setup | |||||||||||
| Rated power | 12V/450W 24V/900W | 12V/600W 24V/1200W | 12V/750W 24V/1500W | 12V/900W 24V/1800W | 12V/450W 24V/900W 36V/1350W 48V/1800W | 12V/600W 24V/1200W 36V/1800W 48V/2400W | |||||
| No-load loss | < 13mA/12V;< 15mA/24V | <30mA | The lower the system voltage, the smaller the no-load loss. | ||||||||
| Max. Solar energy input voltage | <55 | <110V | |||||||||
| Max. voltage at the battery end | <34V | <68V | |||||||||
| Battery type | Parameters | ||||||||||
| Flooded FLD | Sealed SLD | GEL GEL | Lithium LI | Default SLD | |||||||
| Overvoltage protection | 16.0V | ×1/12V; ×2/24V; ×3/36V; ×4/48V; | |||||||||
| Equalizing charging voltage | 14.8 | 14.6 | - | - | |||||||
| Boost charging voltage | 14.6 | 14.4 | 14.2 | 14.4 | |||||||
| Floating charging voltage | 13.8 | 13.8 | 13.8 | - | |||||||
| Charging recovery voltage | 13.2V | ||||||||||
| Over-discharge recovery voltage | 12.5V(settable with the keys) | ||||||||||
| Over-discharge voltage | 11.0V(settable with the keys) | ||||||||||
| Equalizing charging interval | 30days | - | - | ||||||||
| Equalizing charging time | 1H | - | - | ||||||||
| Boost charging time | 2H | - | |||||||||
| Temperature compensation | -3.0mV/ºC/2V | - | |||||||||
| Light controlvoltage | Light control on 5V, light controloff 6 V (light control on plus 1 V) | ×1/12V; ×2/24V; ×3/36V; ×4/48V; | |||||||||
| Light control judgment time | 10 minutes | ||||||||||
| USB function | Yes | optional | No | ||||||||
| Bluetooth function | optional | ||||||||||
| Operating temperature | -25ºCto+55ºC; | ||||||||||
| IP protection degree | IP30 | ||||||||||
| Net weight | 390g | 650g | 650g | ||||||||
| Protection functions | Battery plate reverse connection protection note 1, a battery reverse connection protection note 2, charging battery board short circuit protection, charging the battery open circuit protection, charging over current protection, overload protection, load short-circuit protection controller and over temperature protection. | ||||||||||
| Dimensions | 164.0×103.5×47.0(mm) | 189.27×127.2×54.0 (mm) | 189.27×127.2×54.0 (mm) | ||||||||
The energized load keeps in output state.
| LED Display | Mode | LED Display | Mode |
| 0 | Pure light control mode | 9 | Light control + time control (9 hours) |
| 1 | Light control + time control (1 hour) | 10 | Light control + time control (10 hours) |
| 2 | Light control + time control (2 hours) | 11 | Light control + time control (11 hours) |
| 3 | Light control + time control (3 hours) | 12 | Light control + time control (12 hours) |
| 4 | Light control + time control (4 hours) | 13 | Light control + time control (13 hours) |
| 5 | Light control + time control (5 hours) | 14 | Light control + time control (14 hours) |
| 6 | Light control + time control (6 hours) | 15 | Manual mode |
| 7 | Light control + time control (7 hours) | 16 | Debugging mode(default) |
| 8 | Light control + time control (8 hours) | 17 | Normal on mode |
Error Code List
| Code on LCD screen | Corresponding error |
| E0 | No error |
| E1 | Battery over discharge |
| E2 | Battery overvoltage |
| E3 | Undervoltage warning |
| E4 | Load short circuit |
| E5 | Load overload |
| E6 | Temperature too high inside controller |
| E8 | Charging current too high |
| E10 | Solar panel input voltage is too high |
Common Problems and Solutions
| Symptoms | Causes and Solutions |
| LCD screen does not light up | Check whether the battery is correctly connected. |
| Incomplete display or no renewal on LCD screen | Check whether the ambient temperature is too low and whether the display recovers when the temperature rises. |
| No charging with sunlight present | Check whether the solar panel is correctly connected and contact is good and reliable. Check whether the solar panel voltage falls below the battery voltage. |
| The sun icon does not light up, while the solar panel icon does. The battery voltage is normal, but there is no output. | The load will be switched on automatically after 10 minutes (set by the user). |
| The battery icon flashes quickly, and there is no output. | System overvoltage. Check whether the battery voltage is too high. |
| The battery icon flashesslowly, and there is no output. | The battery is over-discharged, and will recover when recharged adequately. |
| The load icon flashes quickly, and there is no output. | The load's power exceeds the rated value or it's short-circuited. After removing the problem, long press the key or wait until it recovers automatically. |
| The load and the encircling light ring stays lit, and there is no output. | Check whether the power-consuming device is connected correctly and reliably. |
| Other symptoms | Check whether wiring is sound and reliable, and system voltage is correctly recognized. |
| The charging and discharging amp-hrs displays: 9999.K Ah | The decimal point flashes indicating that the displayed value has reached its upper limit. Long press to reset it. |
About us:Guangzhou Queenswing Solar Energy Co. Ltd. Is a professional manufacturer and exporter of solar products including power inverter, solar charge controller, solar panel and solar battery in China. To provide high-quality product and considerate service is always our basic policy. We believe high quality creates business and progress is from improvement.
Main products:
Pure sine wave power inverter
Modified sine wave power inverter
UPS power inverter with charger
Car power inverter
Solar charge controller
Solar panel
Solar battery
Our power inverter and solar products are exported to most global coutries and get good reputation because of our favorable quality and stable performance.
Payment Terms:
T/T, Western Union, Money Gram
Production arranged after receipt of payment.
Lead Time:
Sample order will be delivered within 7 working days.
Order quantity below 100PCS, delivery time is 7-15 working days.
Container order will be delivered within 15-30 working days.
Shipment:
Courier: FedEx, DHL, TNT, UPS, Aramex, EMS ect.
Forwarder: By sea / air or Customer designated
Supply Ability
--
Packaging and Shipping
Lead time
--
Port
--
Packaging details
--
Comments
Welcome to zddshop comments! Please keep conversations courteous and on-topic. To fosterproductive and respectful conversations,
you may see comments from our Community Managers.
Sign up to post
Show More Comments
zpostcode
Recruit
weather
mreligion
Yellowpages
sport
constellation
shopping
name
game
directory
literature
Word
tour
furnish
Lottery
tftnews
lyrics
News
digital
car
dir
Edu
Finance
