Rechargeable Gel/ Lithium Solar Battery Solar Inverter 2kw with Charger
$341
/piece
price excl.VAT
Negotiable
- Minimal order
- 100 pieces
Message Phone call
Product Specifications
--
Product Description
Rechargeable Gel/ Lithium Solar Battery Solar Inverter 2kw with Charger
| Model | 1KW | 1.5KW | 2KW | 3KW | 4KW | 5KW | 6KW | 8KW | 10KW | 12KW | 15KW | 18KW |
| Continuous Output Power | 1KW | 1.5KW | 2KW | 3KW | 4KW | 5KW | 6KW | 8KW | 10KW | 12KW | 15KW | 18KW |
| Surge Rating(20s) | 3KW | 4.5KW | 6KW | 9KW | 12KW | 15KW | 18KW | 24KW | 30KW | 36KW | 45KW | 54KW |
| Inverter Output | ||||||||||||
| Output Waveform | Pure Sine wave / Same as input(Bypass Mode) | |||||||||||
| Nominal Efficiency | >88% (Peak) | |||||||||||
| Line Mode Efficiency | >95% | |||||||||||
| Power Factor | 0.9-1.0 | |||||||||||
| Nominal Output Voltage rms | 100-110-120Vac / 220-230-240Vac | |||||||||||
| Output Voltage Regulation | ±10% RMS | |||||||||||
| Output Frequency | 50Hz ± 0.3Hz/60Hz ± 0.3Hz | |||||||||||
| Short Circuit Protection | Yes( 1 sec after fault) | |||||||||||
| Typical Transfer Time | 10ms (Max) | |||||||||||
| THD | < 3% (Rated battery level, rated full linear load) | |||||||||||
| DC Input | ||||||||||||
| Nominal Input Voltage | 12V/24V | 12V/24V/48V | 24V/48V | 24V/48V/96V | 48V/96V | |||||||
| Minimum Start Voltage | 10.0Vdc / 10.5Vdc for 12Vdc Mode | *2 for 24Vdc, *4 for 48Vdc, *8 for 96Vdc | ||||||||||
| Low Battery Alarm | 10.5Vdc / 11.0Vdc for 12Vdc Mode | |||||||||||
| Low Battery Trip | 10.0Vdc / 10.5Vdc for 12Vdc Mode | |||||||||||
| High Voltage Alarm | 16.0Vdc for 12Vdc Mode | |||||||||||
| Low Battery voltage recover | 15.5Vdc for 12Vdc Mode | |||||||||||
| Idle Consumption-Search Mode | < 25 W when Power Saver On.(Refer to Table ) | |||||||||||
| AC Charger | ||||||||||||
| Output Voltage | Depends on battery type (Refer to Table 2.5.2) | |||||||||||
| Charger Breaker Rating | 20A | 20A | 20A | 25A | 32A | 40A | 40A | 50A | 80A | 80A | 100A | 125A |
| Max Charge Power Rate | 1/3 Rating Power (Refer to Table 2.5.3) | |||||||||||
| Battery Initial Voltage for Start | 10-15.7Vdc for 12Vdc Mode | *2 for 24Vdc, *4 for 48Vdc, *8 for 96Vdc | ||||||||||
| Over Charge Protection S.D. | 15.7Vdc for 12Vdc Mode | |||||||||||
| Battery Type Selector | Switching Setting | Description | Fast Mode/ VDC | Float Mode/ VDC | ||||||||
| 0 | Charger Off | |||||||||||
| 1 | Gel USA | 14.0 | 13.7 | |||||||||
| 2 | AGM 1 | 14.1 | 13.4 | |||||||||
| 3 | Lithium | 13.8 | 13.6 | |||||||||
| 4 | Sealed Lead Acid | 14.4 | 13.6 | |||||||||
| 5 | Gel EURO | 14.4 | 13.8 | |||||||||
| 6 | Open Lead AckJ | 14.8 | 13.8 | |||||||||
| 7 | LifePO4 | 14.0 | 13.8 | |||||||||
| 8 | De-sulphation | 15.5 (4 hours then off) | 13.8 | |||||||||
| 9 | Classic LFP | 13.6 | 13.5 | |||||||||
| For 12Vdc Mode Series (*2 for 24Vdc Mode;*4 for 48Vdc Mode;*8 for 96Vdc Mode) | ||||||||||||
| BTS | ||||||||||||
| Battery Temperature Sensor(Optional) | Yes(Refer to the table ) Variances in Charging Voltage & S.D Voltage Base on the Battery Temperature. | |||||||||||
| Bypass & Protection | ||||||||||||
| Input Voltage Waveform | Sine wave (Grid or Generator) | |||||||||||
| Nominal Voltage | 100-110-120Vac/ 220-230-240Vac | |||||||||||
| Max Input AC Voltage | 150Vac For 120Vac LV Mode : 300Vac For 230Vac HV Mode: | |||||||||||
| Nominal Input Frequency | 50Hz / 60Hz | |||||||||||
| Low Freq Trip | 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz | |||||||||||
| High Freq Trip | 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz | |||||||||||
| Overload Protection (SMPS load) | Circuit Breaker | |||||||||||
| Output Short Circuit Protection | Circuit Breaker | |||||||||||
| Bypass Breaker Rating | 20A | 20A | 20A | 25A | 32A | 40A | 40A | 50A | 80A | 80A | 100A | 125A |
| Transfer Switch Rating | 30Amp for UL&TUV | 40Amp for UL | 80Amp for UL | 100Amp for UL | ||||||||
| Bypass without Battery Connected | Yes (optional) | |||||||||||
| Max Bypass Current | 30Amp | 40Amp | 80Amp | 80Amp | ||||||||
| Solar Charger (optional) | ||||||||||||
| Rated Voltage | 12Vdc | 24Vdc | 48Vdc | |||||||||
| Rated Charge Current (Includes Load Current) | 40A/60Amp | 40Amp | ||||||||||
| Load Current | 15Amp | |||||||||||
| Input Voltage Range | 15-150Vdc | 30-150Vdc | 60-150Vdc | |||||||||
| Max. PV Open Circuit Array Voltage | 150Vdc | |||||||||||
| Overload Protection (DC Load) | 2.0*I (Rated) >5s; 1.5*I (Rated) >20s; 1.25*I (Rated) Temperature Controlled | |||||||||||
| Typical Idle Consumption | At idle < 10mA | |||||||||||
| Bulk Charge | 14.6Vdc | 29.2Vdc | 58.4Vdc | |||||||||
| Floating Charge | 13.4Vdc | 26.8Vdc | 53.6Vdc | |||||||||
| Equalization Charge | 14.0Vdc | 28.9Vdc | 58.0Vdc | |||||||||
| Over Charge Disconnect | 14.8Vdc | 29.6Vdc | 59.2Vdc | |||||||||
| Over Charge Recovery | 13.6Vdc | 27.2Vdc | 54.4Vdc | |||||||||
| Over Discharge Disconnect | 10.8Vdc | 21.6Vdc | 43.2Vdc | |||||||||
| Over Discharge Reconnect | 12.4Vdc | 24.6Vdc | 49.6Vdc | |||||||||
| Temperature Compersation | - 13.2mV/ºC | - 26.4mV/ºC | - 52.8mV/ºC | |||||||||
| Lead Acid Battery Settings | Adjustable | |||||||||||
| NiCad Battery Settings | Adjustable | |||||||||||
| Low Voltage Reconnect | 12.0 - 14.0Vdc | 24.0 - 28.0Vdc | 48.0 - 56.0Vdc | |||||||||
| Low Voltage Disconnect | 10.5 - 12.5Vdc | 21.0 - 25.0Vdc | 42.0 - 50.0Vdc | |||||||||
| Ambient Temperature | 0-40ºC (Full load) 40-60ºC (De-rating) | |||||||||||
| Weight (KG) | 2.5 | |||||||||||
| Mechanical Specifications | ||||||||||||
| Mounting | Wall Mount | |||||||||||
| Display | Status LEDs / Status LEDs+LCD | |||||||||||
| Inverter Dimensions(L*W*H) mm | 388*415*200 | 488*415*200 | 588*415*200 | 688*415*230 | ||||||||
| Packing Dimensions(L*W*H) mm | 550*520*310 | 650*520*310 | 750*520*310 | 850*520*350 | ||||||||
| N.W. (KGS) | 21 | 22 | 23 | 27 | 38 | 48 | 49 | 60 | 66 | 70 | 75 | 78 |
| G.W. (KGS) | 24 | 25 | 26 | 30 | 41 | 51 | 52 | 63 | 69 | 73 | 78 | 81 |
Q1: How do I choose the size of the inverter?
A: It is vary according to loads' types. You could refer to loads' total output power, which uaully should be equal to inverter's output power.
Notice:
Resistive load: inverter's output power = loads' total output power
Capacitive load: inverter's output power = 2-5 times of loads' total output power
Inductive load: inverter's output power = 4-7 times of loads' total output power
You also could tell us your demand, then our sales will recommend a suitable inverter to you.
When the product have problem, how to solve it?
Q2: How is the shipping arranged if I order sample/ trial inverters from SOPOWER?
A: We can ship to any country in the world even you only order 1 unit of our inverter. Inverter will be shiped either by EXPRESS,such as DHL, FEDEX, UPS, TNT etc., which arrived in about one week, or shipped with more economical way - by SEA.
Q3: How long will it take after I order the inverters?
A: If there are in stock, we will arrange the shipping within two working days after payment arrived in our account. The total delivery period depends on the shiping ways you select.
If wihtout any stocking, it takes about 10-25 working days for producing.
Q4: What is the warranty of inverter?
A: 1 year for SOPOWER off grid solar inverter, 2 years optional.
Q5: When the product have problem, how to solve it?
A: We have a professional after-sales team, in case of any problems, first contact us to help you solve, we have a 12 months warranty.We will track product usage until you are satisfied.
Supply Ability
--
Packaging and Shipping
Lead time
--
Port
--
Packaging details
--
Comments
Welcome to zddshop comments! Please keep conversations courteous and on-topic. To fosterproductive and respectful conversations,
you may see comments from our Community Managers.
Sign up to post
Show More Comments
zpostcode
Recruit
weather
mreligion
Yellowpages
sport
constellation
shopping
name
game
directory
literature
Word
tour
furnish
Lottery
tftnews
lyrics
News
digital
car
dir
Edu
Finance
