Product Specifications

--

Product Description

Overview

Quick Details

Place of Origin: Turkey

Brand Name: natural asphalt

Model Number: turkey

Type: Rock Asphalt

Grade: industrial

Softening Point: 205

Supply Ability

Supply Ability: 150 Metric Ton/Metric Tons per Day

Packaging & Delivery

General description of Asphaltite in paint

Asphaltite concrete floor paint is special a black lustrous asphalt to protect and decorate floors in homes and industry, both indoors and outdoors.Asphaltite concrete floor paint is a scientifically formulated treatment for masonry floors. It outperforms ordinary floor paint under traffic, washings, weather, acids and alkalis.

Asphaltite base paints with below specification after mix with solvent:

• Concrete floor paint
• Formulated to protect and decorate masonry floors
• For interior or exterior use
• Low VOC
• Non slip
• Low sheen
• Fast drying
• No primer needed
• Cleans up with soap and water
• Latex base

Suitable Asphaltite in paint

Asphaltite , when fluxed with raw tung or oiticica oil, gives an unstable liquid, that is, one which will take on excessive body when aging, and one which is not gas-proof.

The use of the present type of oils, however, results in a paint which does not take on excessive body upon aging and at the same time does not check and deteriorate rapidly upon exposure.

Driers, such as lead, cobalt, or manganese oxide, or the like, may be incorporated to control the drying time of the finished paint. Thinning oils such as mineral spirits, solvent naphtha, or any good solvent for the asphaltite and the oils, incorporated to bring the paint to the desired consistency. This normally requires about 50% to 65% by weight of thinning oils.

Use of Asphaltite use in paint

A paint consisting essentially of 20 gallons of petroleum solvent, 10 gallons of linseed oil, 10 gallons turpentine, pounds of Asphaltite pigment, 4 gallons varnish mixture consisting of 17.8% pentaerythritol rosin ester, 30.8% dehydrated castor oil, 1.4% of a mixture of lead, cobalt and manganese naphthenates, 1 gallon wetting agent consisting essentially of salts of petroleum sulfonic acids, 2 quarts of drier, and 1 pint of a hydrocarbon silicon penetrating oil, obtained by heating a mixture of finely ground silicon dioxide under pressure to a temperature of about 300 F. with a distillate product obtained by subjecting asphaltum to fractional distillation, said distillate product being that fraction which distillates at a temperature range of about 430 F. to 438 F

Color of asphaltite depend on temperature of melting also could be black, brown till red.

Advantage of asphaltite in paint industry

Environmental concerns have been raised and asphaltite is no longer an option.

Oil based sealers are bad for the environment, dont meet Federal specs and are outlawed in several states due to high VOCs. (pollutants)

Packing of asphaltite natural asphalt lump and powder form micronized

asphaltite in lump form like rock packed in 500~1000kg jumbo bag

200 mesh packed in 500~1000kg jumbo bag

300 mesh packed in 500~1000kg jumbo bag

30-40 mesh packed in 500~1000kg jumbo bag

100 mesh packed in 500~1000kg jumbo bag

300 mesh packed in 25kg pp bag

200 mesh packed 25kg multi paper bag

200 mesh packed 50lbs multi paper bag

asphaltite 30-40 mesh packed pp bag on pallet

Bulk on vessel

Specification of asphaltite with drilling fluid application

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--