Hot selling Cheap price 5A PWM Solar Charge Controller
- Minimal order
- 100 pieces
Message Phone call
Product Specifications
--
Product Description
Overview
Quick Details
Place of Origin: Zhejiang, China
Brand Name: LEYU
Model Number: OPS1205
Type: PWM
Application: Charger Controller, Solar System Controller
Work Time (h): 12h
Max PV Power: 2000w
Max PV Voltage: 24v
Certificate: ce
Warranty: 2, 2 Years
Property: PWM 12V 5A solar controller
Nominal Battery Voltages:: 12/24VDC
Color: Black
Max Solar input: <50V
Maximum Current: 5A
Display: 3 LED Indicators
Protection Function: Battery reverse polarity Output short circuit Over temperature
Box: Gift box
Product name: solar controller
Packaging & Delivery
Hot selling Cheap price 5A PWM Solar Charge Controller
Safety Instructions
Danger of explosion due to improper handling of batteries! Corrosive hazard by leaking battery acid! Keep children away from batteries and acid! Smoking, fire and naked lights are prohibited when handling batteries. Prevent sparking and wear eye protection gear during installation.
Solar modules generate power from light incidence. Even by low light incidence solar modules carry the full voltage. Therefore, work cautiously and avoid sparking during all work.
Use only well-isolated tools!
If the regulator is operated in a manner not specified by the manufacturer, the regulator’s constructive protective measures can deteriorate.The factory signs and marking may not be modified, removed or made unrecognizable. All work must be performed in conformity with the national electrical specifications and related local regulations!
When installing the regulator in foreign countries, information concerning regulations and protective measures must be obtained from the relevant institutions / authorities.
Do not begin the installation until you are sure that you have technically understood the manual and perform the work only in the order provided in this manual!
The manual must be available during all work performed on the system, third parties included.
This manual is a component of the system regulator and must be included with the regulator when given to a third person.
The Controller is equiped with a low power surge protection. The installer had to care for a efficient lightning protection.
Scope of Application
The charge regulator is only suitable for regulating photovoltaic solar modules. Never connect another charging source to the charge regulator. This can destroy the regulator and / or source.
The regulator is only suitable for the following chargeable 12V or 24V battery types:
-Lead storage batteries with liquid electrolytes
-Sealed lead storage batteries; AGM, GEL
Important!The regulator is not suited for nickel Cadmium, nickel metal hydride, lithium ions or other rechargeable or non-rechargeable batteries.
The regulator may only be used for the particular solar applications provided.Also,observe that the permitted, model-specific, nominal currents and voltages are not exceeded.
Installation
Install the regulator near the battery on a suitable surface. The battery cable should be as short as possible and have a suitable cable diameter size to minimize loss, e.g. 4 mm² at 20 A and 2m length.A temperature compensated final charge voltage will extend the batteries lifetime and uses the optimum charge capacity.
Do not install the controller to direct sunlight.
To ensure the air confection on each side keep a distance of 10 cm to the regulator.
Connecting the Regulator
1.Connect the battery to the charge regulator - plus and minus
2.Connect the photovoltaic module to the charge regulator - plus and minus
3. Connect the consumer to the charge regulator - plus and minus
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
System indicator
1.Solar Indicator
Off:without enough sun,charge off.
Fast flashing:Buck/equalize charge
Constant on:Acceptance charge
Slow flashing:Float charge
2.Battery Indicator
Green:Battery power is full(V>13.4V)
Orange:Battery power is middle(12.4V<V<13.4V)
Red:Battery power is low(11.2V<V<12.4V)
Red-flashing:Battery over discharge.(11.2V<V)
3.Consume Indicator
Off:Controller output closed
On:Output normal
Slow Flashing: Continues over-current
Fast Flashing:Short-circuit
4.System mode
5.Setting button
Model | OPS1205 | OPS1210 | OPS1215 | OPS1220 |
Rated charging current | 5A | 10A | 15A | 20A |
Rated discharging current | 5A | 10A | 15A | 20A |
Short-current protection | 25A | 25A | 25A | 25A |
System voltage | 12V/24V Auto adapt | |||
Over current protection | <1.3 maintain for 60s | |||
<1.6 maintain for 5s | ||||
>1.6 shut down immediately | ||||
Stand-by lost | <5mA | |||
Charge voltage drop | ≤0.26V | |||
Discharge voltage drop | ≤0.15V | |||
Max solar panel voltage | 21V | |||
Operating temperature | -35℃ to +55℃ | |||
Equalize charging voltage | 14.8V | |||
Bulk charging voltage | 14.5V | |||
Acceptance charging voltage | 14.2V | |||
Float charging | 13.8V | |||
Charge return voltage | 13.2V | |||
Discharge stop voltage | 11.2V | |||
Discharge return voltage | 12.6V | |||
Temperature compensation | N/C | |||
Control mode | PWM( Pulse Width Modulation ) | |||
Maximum wire size | 12AWG |
s
FAQ-Solar controller
The warranty of our solar controller is 2 years
3.What's the Payment term ?
Send your inquiry Details in the below, Click "Send" Now !
AND IT ENABLES US TO PROVIDE 2-YEARS QUALITY WARRANTY
Phenomenon | Solution |
Under the sunshine, the indicator light (NO.1) of solar panel is off | Please check the line to photocell and make sure the proper connection |
As the cell panel is charged, the indicator light (NO.1) flashes quickly | The system is over-voltage. Please check whether the storage battery is well connected, or its voltage is too high |
The indicator light (NO.2) of storage battery is off | Please check whether the storage battery is well connected |
The indicator light (NO.2) of storage battery is red without output | The storage battery is over-discharged |
The indicator light (NO.3) of load flashes slowly without output | The load power is higher than the rated power, please stop the operation of some equipment which consumes power, and then press the key for a long time |
The indicator light (NO.3) of load flashes quickly without output | The load is short circuit and need to be adjusted. Then press the key for a longer time or wait till the next day, it will restart to work |
The indicator light (NO.3) is on continually without output | Please check whether the equipment which consumes power is well connected |
Others | Please check the connection, 12/24V Auto identified |
Company Information
1.Can it be customized?
Everything you see can be coustomized.
2.When wii you reply?
Reply within 1 hour,reply within 24 hours if you are more than 5 time zone apart.
3.The products is original?
Our products are 100% original.
4.How long is the delivery time?
Delivery time about 1-7 workingdays.
5.Is there any discount?
Click into the contact coustomer service can enjoy a discount.
Visit hot store
Supply Ability
--
Packaging and Shipping
Lead time
--
Port
--
Packaging details
--