Product Specifications

Type

DC/AC Inverters

Product Description

Gwv-600W-220V 22-60VDC 190-260VAC Solar Grid Tie Inverter

 Y-solar GWV-600W Smart Grid Tie inverter is a compact unit,which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid.The AC output from Smart Micro inverter is synchronized and in-phase with the utility grid.It is a key device of power generation systems such as PV power generation system.

Specification

Main Features

Feature:

1. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance.

2. Creative MPPT technology, efficiency more than 99%, faster reaction, more sensitive of reaction and more reliable of Maximum power point locking.

3. Parallel modular design, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system.

4. Adopting high-frequency isolation transformer type, high efficiency, and high security.

5. Perfect electrical protection function.

6. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion.

7. Getting electronic circuit design, appearance design and other core technology patents.

8. Wide input voltage (22-60VDC), suit for different DC power supply.

Application Method

Attention

Connection Order:

Connect the battery with the controller.

Connect the solar panel with the controller.

Connect the load with the controller or inverter.

Disconnection order:

Disconnect the solar panel.

Disconnect the battery.

Disconnect the load.

Precautions:

please make sure connect your inverter with your battery

Please avoid to install in the following environments wet,dusty places or places with flammable and explosive gases.

Install the controller at the vertical plane.

Instructions

Feature:

1. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance.

2. Creative MPPT technology, efficiency more than 99%, faster reaction, more sensitive of reaction and more reliable of Maximum power point locking.

3. Parallel modular design, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system.

4. Adopting high-frequency isolation transformer type, high efficiency, and high security.

5. Perfect electrical protection function.

6. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion.

7. Getting electronic circuit design, appearance design and other core technology patents.

8. Wide input voltage (22-60VDC), suit for different DC power supply.

Installation:

1. Diagrammatize DC input and AC output terminals,

2. Attach the Smart Microinverter to the racking or fix onto the wall,

3. Properly connect the positive and negative of solar panel and Smart Microinverter,

4. AC power cable connects with Smart Microinverter and residential power grid which refers to low voltage civilian single-phase power grid.

5. Switch on power grid after check for input and output connections arecorrect and then switch on the Smart

Microinverter. At such time, LED indicator light up from left to right, it is operating for LED indicators checking.

Then operation will enter into DC voltage range checking as per reference line of 4 of section of LED Indicators

introduction. After such checking, LED will off from right to left one by one, and then in standby operation. When

DC and AC connect properly, AC LED and AC frequency LED will light up accordingly. And then Fault red LED off,

blue ST LED and Power output display Red LED light up and flash. It is indicate that inverter is working. When LED

flash slowly, it is indicate that MPPT operating. When blue LED long light and it is indicate that MPPT locking in.

At the same time, Power output display red LED indicators start to run from bottom to top as per reference line

of 5 of section of LED Indicators introduction.

LED Indicators

1. Red LED

1.1 Red FAULT LED indicator lights up under any conditions as listed below:

a) Low-voltage protection(DC input voltage lower than 22V Min. input voltage of inverters)

b) Over-voltage protection(DC input voltage higher than 60V Max. input voltage of inverters

c) Over-temperature protection (inverters will be shut down for power output when the temperature of

body of inverters higher than 60-65ºC.) And inverter will be automatically restart up when the temperature

of body of the inverter down to 40-50ºC

d) Power grid fault protection (when 110VAC or 220VAC grid power outage and/or tripped

e) Islanding protection: inverter will be automatically shut down for power output when disconnect with power grid

1.2 Red LOW indicator: DC input voltage lower than 38VDC

1.3 Red High indicator: DC input voltage higher than 38VDC

1.4 Red Power LED indicator: starting up DC voltage checking and output power LED status display

2. Blue ST LED

a) Blue LED flash: adjusting for power output, MPPT operating for tracking

b) Blue LED long light: indicates inverter locking-in Max. output power operation status

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--