Product Specifications

Type

DC/AC Inverters

Product Description

 Gti-1000W-18V-110V-B Max-80A 10.8-28VDC input solar on Grid Tie Converter

 Grid Tie Inverter 1000W MPPT function Pure Sine Wave 110V OR 220V output 18V Input Micro On Grid Tie Inverter 18V 36 Solar Cells

Specification

Date Sheet:

Main FeaturesUnique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance.Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable.Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system.Adopting high-frequency isolation transformer type, high efficiency, and high security.Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. 

Application Method

Attention

1.Diagrammatize DC input and AC output terminals,

2. Attach the Smart Microinverter to the racking or fix onto the wall,

3. Properly connect the positive and negative of solar panel and Smart Microinverter,

4.AC power cable connects with Smart Microinverter and residential power grid which refers to low voltage civilian single-phase power grid.

5. Switch on power grid after check for input and output connections are correct and then switch on the Smart Microinverter. The Red/green LED lights up at the same time and then red LED lights off follow on and green LED flash fast, it is means that Smart Microinverter is run for MPPT operation. When green LED long light and it is means that maximum power point lock-in, Smart Micro inverter proper functioning and output steady.

Status Indications of LED 

1. Red LED indicator lights up under any conditions include but not limited:

a) Low-voltage protection (DC input voltage lower than Min. input voltage of inverters), 

b) Over-voltage protection (DC input voltage higher than Max. input voltage of inverters), 

c) Over-temperature protection (inverters will shut down for power output when temperature of body of inverters higher than 65-75°C, and inverter will be automatically restart up when temperature down to 40-50°C.)

a) Power grid fault protection when 110VAC or 220VAC grid power outage and/or tripped.

b) Islanding protection: inverter will be automatically shut down for power output when disconnect with power grid.

c) Short-circuit protection: inverter stops work when output line short-circuits..

d) Red LED lights on for a while and then green LED lights on in one second when inverter starts to work.

2. Green LED indicator lights up under any conditions include but not limited:

a) Green LED flash: adjusting for power output, MPPT operating for tracking.

b) Green LED long light: indicates inverter locking-in Max. output power operation status.

c) When green LED flash from the bottom up in turns, it is indicates the inverter is locked at maximum power point as well as the output power is steady. The more power output, the faster running of green LED.

3. Please note that above operations only run at grid-connected status.

Instructions

Feature:

Smart grid tie inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. The AC output from Smart Microinverter is synchronized and in-phase with the utility grid. It is a key device of power generation systems such as PV power generation system, wind turbine power generation system. Smart Microinverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules, 18V (36 cells), 24V (60 cells) monocrystal and/or Polycrystalline solar panels, wind turbines and batteries. Smart Microinverters are stabilization, reliable and high conversion efficiency items. It is the best choice for PV power generation systems.

Smart Microinverter can be easily placed and attached to the rack underneath of PV module. No need spaces for independent installation and low voltage DC wire connects from the PV module to Smart Microinverter can eliminate the risk of high DC voltage. Distributed modularization design philosophy for Smart Microinverter insures the productiveness of the whole system and will not affect by a single point of failure. Each Smart Microinverter is individually connected to each PV module in the array. This unique configuration means that an individual Maximum Peak Power Point Tracker (MPPT) controls each PV modules and insures that the maximum power available from each PV module is exported to the utility grid regardless of the performance of the other PV modules in the array which may be affected by shading, soiling, orientation or mismatch, etc. Smart Microinverter insures top performance for maximizing energy production from the whole PV system and gets return on investment in less time.

Advantages of Smart Microinverter

1. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance.

2. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable.

3. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system.

4. Adopting high-frequency isolation transformer type, high efficiency, and high security.

5. Perfect electrical protection function. 

6. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. 

7. Getting electronic circuit design, appearance design and other core technology patents. 

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--