Product Specifications

--

Product Description

Overview

Quick Details

Place of Origin: Ukraine

Brand Name: Furnace oil

Model Number: Furnace oil

Type: SLCO

Application: Oil Product

Grade: Brent Blend

Chemical Composition: International Standard

Supply Ability

Supply Ability: 100000 Metric Ton/Metric Tons per Week

Packaging & Delivery

SPECIFICATION FOR FURNACE OIL

DEFINITION:

A dark viscous residual fuel obtained by blending mainly heavier components from crude distillation unit, short residue and clarified oil from fluidized catalytic cracker unit.

NOMENCLATURE

Bunker fuel, furnace oil, Fuel oil are other names for the same product. Though Fuel oil is a general term applied to any oil used for generation of power or heat, Fuel oil can included distillates and blends of distillates and residue such as Light Diesel Oil

VISCOSITY

Viscosity is the most important characteristic in the furnace oil specification. It influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous it may become difficult to pump, burner may be hard to light and operation may be erratic. Poor atomization may result in the carbon deposits on the burner tips or on the walls. The upper viscosity limit for furnace oil is such that it can be handled without heating in the storage tank is excepting under server cold conditions. Pre-heating is necessary for proper atomization.

FLASH POINT

As per the Controller of Explosives classification, Furnace oil falls in the class "C" category with minimum flash point standard of 66 deg. C. Since Penskey Martens Closed Cup method is used, it is apparent that a small quantity of low boiling point hydrocarbons is sufficient to lower the flash point drastically.

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--