zddshop
/
Product
/
Energy
/
Dhs-Xs Intelligent Wireless Solar Controller

Dhs-Xs Intelligent Wireless Solar Controller

$7 /piece price excl.VAT

Negotiable
Order

Minimal order
100 pieces

Message Phone call

Product Specifications

--

Product Description

Main features

1. The new Solar Charge Controller remote control design, the wireless control distance can be up to 10 meters, and the controller parameters can be modified by remote control;

2. Data communication adopts multiple handshake protocol and Run Length Encoding to make data transmission accurate and fast;

3. The wireless reading controller runs parameters to facilitate the quick maintenance and operation of the system;

4. Support 12V24V lead acid battery, 3 series of lithium battery, 4 series of LifePO4 battery, customizable parameters;

5. Enable the activating function of lithium battery protection, and can open the load at any time by manual remote control;

The maximum efficiency of the constant current source is 96%.

7. Intelligent 5 segment dimming light, power adjustment more accurate, color temperature performance more outstanding;

8. The battery is equipped with low voltage protection, intelligent power output, and effective protection of lighting time;

Excellent current ripple control and load linearity control, minimizing LED light failure and lengthening LED life.

10. Improved charging algorithm, charging more efficiency, making solar energy use time longer;

11. The maximum output voltage of the load can be up to 50V, which can drive up to 15 LED lights in series, with maximum power of 80W;

12. Low temperature charging protection of lithium, when the ambient temperature is below zero, it can be set to stop low temperature charging and effectively protect the battery;

13. Enhanced battery anti-grafting protection, LED short-circuit protection, open road protection, etc., to make the system fully and effectively protected;

Not only support external temperature compensation, internal PCB has the temperature protection and recovery function;

15. Organic thermal conductivity silicone seal, IP68 waterproofing grade, can be used in all kinds of bad environment, industrial grade quality guarantee;

16. The high power density design of the metal shell gives the maximum power to the unit volume, while it can effectively control the temperature rise;

17. Support external photocontrol trigger (need to add modules), support human infrared or microwave induction (additional modules are required).

Technical parameters

Accumulator voltageColloid, open batteryTernary lithium batteryLithium iron phosphate battery
12V/24V3.7V*3S3.2V*4S
Rated charging current10A
Rated power12V->max40W  /×2/24V ->max80W
Output voltage16~60V
open circuit voltage< 55V
Overcharge protection voltage14.5V/29.0V12.5V14.4V
Overcharge recovery voltage14.0V/28.0V12.3V14.2V
Charge voltage13.8V/27.6V12.2V14.2V
Floating charging voltage 13.2V/26.4V12.0V14.0V
Overshoot protection voltage 11.0V/22.0V9.6V10.4V
Overrelease voltage12.5V/25.0V11.1V12.8V
Low voltage protection voltage12.0V/24.0V11.1V12.8V
Light control turn on lamp voltage 5.0V/10.0V5.0V5.0V
Light control lamp voltage 7.0V/14.0V7.0V7.0V
Manual switchParameters can be modified, default: off, light control mode
Intelligent reduced powerParameters can be modified, default: yes
Sub-zero chargeParameters can be modified, default: yes
No-load loss≤10mA
Number of lights in series12V-> 5 ~ 15/2 / 24V -> 10 ~ 15 (customizable)
Working temperature-35ºC--+65ºC;
Protection gradeIP68
The net weight0.25Kg
Diameter and length1.5mm²,≤100mm
Size (length x width x height)68×84×21mm

Technical parameters

Accumulator voltageColloid, open batteryTernary lithium batteryLithium iron phosphate battery
12V/24V3.7V*3S3.2V*4S
Rated charging current10A
Rated power12V->max40W  /×2/24V ->max80W
Output voltage16~60V
open circuit voltage< 55V
Overcharge protection voltage14.5V/29.0V12.5V14.4V
Overcharge recovery voltage14.0V/28.0V12.3V14.2V
Charge voltage13.8V/27.6V12.2V14.2V
Floating charging voltage 13.2V/26.4V12.0V14.0V
Overshoot protection voltage 11.0V/22.0V9.6V10.4V
Overrelease voltage12.5V/25.0V11.1V12.8V
Low voltage protection voltage12.0V/24.0V11.1V12.8V
Light control turn on lamp voltage 5.0V/10.0V5.0V5.0V
Light control lamp voltage 7.0V/14.0V7.0V7.0V
Manual switchParameters can be modified, default: off, light control mode
Intelligent reduced powerParameters can be modified, default: yes
Sub-zero chargeParameters can be modified, default: yes
No-load loss≤10mA
Number of lights in series12V-> 5 ~ 15/2 / 24V -> 10 ~ 15 (customizable)
Working temperature-35ºC--+65ºC;
Protection gradeIP68
The net weight0.25Kg
Diameter and length1.5mm²,≤100mm
Size (length x width x height)68×84×21mm

Load requirements

System voltageThe number of light beads in seriesLoad output voltage VoutLoad output power
12V15≥S ≥ 5Vout ≥ 16VPLED ≤40W
24V15≥S ≥ 10Vout ≥ 32VPLED ≤ 80W

Note: 1. 3 series 3.7 V lithium battery corresponding to the voltage load requirement of 12V system;

2. 4 series 3.2 V iron phosphate battery corresponding to the voltage load requirement of 12V system;

Load working mode

The load working time can be divided into five periods, each working time and work power can be adjusted arbitrarily. Different combinations can achieve different control modes.

Adjustment itemparametersRecognition Valuethe output current of the factory will be 150mA, and the power adjustment step will be 10%, and the time will be adjusted to 10min.
The first power  0 ~ 100% rated power100% rated power
The first paragraph0~999min120min
Phase 2 power0 ~ 100% rated power 50% rated power
The second period0~999min240min
Section 3 power0 ~ 100% rated power0
The third period0~999min0
Section 4 power0 ~ 100% rated power0
The fourth period 0~999min0
Phase 5 power0 ~ 100% rated power0
Period 50~999min0

1. Routine optical control timing mode: for example, the lights are black and light for 4 hours, the first 2 hours full power, and the second half power.

Setting: the first power is "100% rated power", the first period is "120min"; The second part is "50% rated power" and "120min" in the second period; The rest of the power time is "0".

2. Electric timing + morning light pattern: cases required day black lights 4 hours, 2 hours before the full power, power, in about two and a half hours after the morning 2 hours before dawn full power lights, the whole night about 10 hours;

Setting: the first power is "100% rated power", the first period is "120min"; The second part is "50% rated power" and "120min" in the second period; The third power is "0" and the third period is "240min". The fourth part is "100% rated power" and the fourth period is "120min". The rest of the power time is "0".

3. Delay electric timing + morning light pattern: example to delay for 30 minutes, dark and light 4 hours, 2 hours before the full power, power, in about two and a half hours after the morning 2 hours before dawn full power lights, the whole night about 10 hours;

Setting: the first power is "0", the first period is "30min"; The second part is "100% rated power" and the second period is "120min". The third part is "50% rated power" and the third period is "120min". The fourth part is "0" and the fourth period is "210min". The fifth stage power is "100% rated power" and the fifth time is "120min".

Note: this controller has a battery low voltage intelligent power function, when the battery voltage is less than the controller setting "low voltage protection value" to step down power output 10%, until to 10% power, the end of the light or battery discharge protection

Matters needing attention

1. It is strictly forbidden that the output voltage of the controller can be caused by excessive output voltage when the output voltage is too high.

2. The controller has set relevant parameters, and the LED lamp is connected to ensure that the parameters are aligned with the controller, otherwise the controller will be damaged or the LED lamp will be burned.

FAQ

Q1. What's Certificates you have? 

A: CE, RoHS, ISO9001, SGS certificates

Q2. How many years warranty? 

A: All of products warranty 2 years. If have any quality problem, could return to us exchange new one or repair IR free. Use our company DHL account, free freight. 

Q3. What's the payment term? 

A: 100% T/T (large order, accept 30% T/T prepay 70% balance before shipping), Western Union, Paypal. 

Q4. How's the delivery time? 

A: Usually 2 hours after receive full payment. OEM order need 10-15 days. 

Q8. How to distinguish solar charge controller with MPPT function? 

A: Input voltage more than output voltage, charging current less than loading current. 

Q12. What about your sale service? 

A: Developing long-lasting relationships with our customers is of utmost importance to us. We are committed to providing you with excellent all-round services, before, during and after the installation of your renewable energy system. 

Why Choose Us?

1>Strict Quality Control

For each order, strict inspections will be put in place for each procedure during their processing. The negative products will be ironed out before shipping

2>Stable suppliers

We have cooperated with many accessory suppliers for many years, so we can get cheaper and high quality accessories and thus we can give you a low price and high quality products.

3>Smooth Shipping

We have partnership with excellent shipping forwarders, therefore we can promise fast delivery and have the goods well protected.

4>Customers from all over the world

We have enough experience about foreign trade and our clients can be found in many countries

5>Fast reply

We will respond your question with 8 hours!

 

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--


Comments
Welcome to zddshop comments! Please keep conversations courteous and on-topic. To fosterproductive and respectful conversations, you may see comments from our Community Managers.
Sign up to post
Sort by
Show More Comments

Other offers of this wholesaler

Copyright 2023-2025 - www.zddshop.com All Rights Reserved