zddshop
/
Product
/
Energy
/
Best Price for Arc Solar Glass for 300W Panel

Best Price for Arc Solar Glass for 300W Panel

$3.9 /piece price excl.VAT

Negotiable
Order

Minimal order
100 pieces

Message Phone call

Product Specifications

--

Product Description

Best Price for ARC Solar Glass for 300W Panel,combined with nanometer anti-reflective coating Low Iron Solar PV Glass with Low Reflectanceay of decreasing light reflectance and improve the solar  cell phtotelectric conversion efficiency.Meanwhile,it reduces the reflected glare of the glass and the pollution caused by the reflectance to the environment. The hydrophobic behavior of the AR coating could in some degree protect the dust and dirt from shading the light and improve the cleaning performance of the glass. With the outstanding characteristics of the high solar lights transmittance, the low reflectance, the low iron, the high mechanical strenght and the high flatness, it is one of the indispensable important parts of solar cell and has been widely used to photovoltaic power generation all over the world.

 

ProductsBest Price for ARC Solar Glass for 300W Panel
Thickness3.2mm,4.0mm
SizeCan be customized,maximum size:1200*2200mm
Solar transmittance3.2mm>93.6%,with AR coating
ApplicationsFor solar cell module
Payment termsT/T
DeliveryWithin 15 days after receiving the deposit 
MOQ20'FCL
PortShanghai

Features :

1.     High solar lights transmittance

2.     The low reflectance: visible light reflectance is less than 7.30%

3.     Low iron:glass has only 0.012% of iron content;

4.     High intensity,the strength is 3-5 times of ordinary annealed glass

5.     Wind pressure resistance: the wind pressure resistance is 1.5-3 times of ordinary annealed glass;

6.     Heat shock resistance: the heat shock resistance is 3 times of ordinary annealed glass;

7.     Safety:if it is broken, it usually breaks into relatively small pieces, which are less likely to cause serious injury.

 

 TestStandardsTest methodResults 
1AppearanceEN1096-2Surface is clean, no scratches,spots or pinholeQualified 
2Light transmittanceISO 9050The ratio after coating is higher than before >2.5>2.6 
3AdhesionASTMD3359The cutting edge is very smooth , no grid slide,0 level 
4Pencil hardnessASTMD3363No thickness of film which scratched by pencil more than 3mm≥6H 
5Salt spray testEN1096-2With 5&percnt;&lpar;&pm;1&rpar;NaC1&comma;under 35ºC&comma;last 4-9days&comma;record  the data before and after the test&comma; T<1&period;04 days&comma;      T&equals;0&period;57   9 days&comma;      T&equals;0&period;91 
6Thermal CycleIEC61215&sol;10Keep the temperature between -40ºC and 85ºC&comma;&pm;2ºC&comma;200 times&comma;&lpar;around 1000 hours&rpar;&comma;record  the data before and after the test&comma;T<1&period;0T&equals;0&period;48 
7Muggle TestIEC61215&sol;10Under 85ºC&comma;&pm;2ºC&comma;relative humidity is 85ºC&comma;&pm;5ºC&comma;around 1000 hours&comma;record  the data before and after the test&comma;T<1&period;0T&equals;0&period;63 
8Wet-cold testIEC61215&sol;10Humidity is 85&comma;&pm;5ºC&comma;temperature is 85ºC&comma;&pm;2ºC&comma;fall to -40ºC&comma;cycle for 10 times&period;Record  the data before and after the test&comma;T<1&period;0T&equals;0&period;80 
9Outdoor exposureIEC61215&sol;10Test with the moniter in outdoor temperature&comma;total radiation need to be 60kmh·m-2 &period;Record  the data before and after the test&comma;T<1&period;0T&equals;0&period;59 
10Mechanical LoadingIEC61215&sol;10Adding the load to 2400Pa and make it distributed&period;Keep 2-3 times&semi;the layer wasn't broken and no serious defects in appearanceQualified 

Production process&colon;

Raw material-->Edging and cleaning-->In-process inspection-->Coating-->Tempering-->Cleaning-->Packing

Packing&colon;

1&period; Interlay paper between two sheets&period; 

2&period; Seaworthy wooden crates&period; 

3&period; Plastic belt for consolidation&period;

Our service&colon; 

1&period;Reply your inquiry in 24 working hours&period;

 2&period;Customized design is avaliable &comma;OEM is welcome &period;

 3&period;Delivery the goods to our customer all over the world with speed and precision&period;

 4&period;Offer customer the products with good quality and competitive price&period;

 

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--


Comments
Welcome to zddshop comments! Please keep conversations courteous and on-topic. To fosterproductive and respectful conversations, you may see comments from our Community Managers.
Sign up to post
Sort by
Show More Comments

Other offers of this wholesaler

Copyright 2023-2024 - www.zddshop.com All Rights Reserved