500W/600W LCD Wind Power Solar on Grid Tie Converter Ys-500g-W-D-LCD
- Minimal order
- 100 pieces
Message Phone call
Product Specifications
Type
DC/AC Inverters
Product Description
Grid Tie Inverter for Wind Turbine
500W/600W LCD Wind Power Solar on Grid Tie Converter YS-500G-W-D-LCD
For DC Output Wind TurbineBuild In Dump Load ControllerBuild In High Wind Protection
Preface
The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid.
This model grid-tie has designed for wind turbines that put out DC voltage. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can't keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.
Layout
There are 4 terminals on the left side of the inverter, 2 terminals will be connected to the DC output from the wind turbine, and 2 black terminals will be connected to dump load resistors.
PIC1, LCD panel YS-500G-WDL-LCD
There are 4 LED indicators, 3 green indicators and 1 red indicator, 3 green LED indicators will start to cycle from left to right when the grid and AC input supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the wind turbine. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called "Island Protection".
Electrical Specifications:
Model | YS-500G_WDL-LCD | |
Normal AC Output Power | 450W | |
Maximum AC Output Power | 500W | |
AC Output Voltage Range | 110V/120V | 90V ~ 130V |
AC Output Frequency Range | 46Hz ~ 65Hz | |
Total Harmonic Distortion(THD) | <5% | |
Power Factor | 0.99 | |
DC Input Voltage Range (the test point is at the output of the rectifier) | 22V~60V (the test point is at the output of the rectifier) | |
Peak Inverter Efficiency | 92% | |
Standby Power consumption | <1.5W | |
Output Current Waveform | Pure Sine-wave | |
MPPT Function | Yes | |
Over Current Protection | Yes | |
Over Temperature Protection | Yes | |
Reverse Polarity Protection | Yes | |
Island Protection | Yes | |
Stackable | Yes |
Mechanical Specifications:
N.W | 3.5Kg |
G.W | 4.0Kg |
Dimension | 332mm*265mm*135mm |
Operating Temperature Range
-10 ~ 45 degrees C
Pic show :
Supply Ability
--
Packaging and Shipping
Lead time
--
Port
--
Packaging details
--