30A 12V/24V USB Charging 5V-3A Solar Battery Charge Controller Rtd-30A
- Minimal order
- 100 pieces
Message Phone call
Product Specifications
--
Product Description
30A 12V/24V USB Charging 5V-3A Solar Intelligent Charge Controller Rtd-30A
RTD-10A / RTD-20A / RTD-30A / RTD-40A
Y-SOLAR RTD-30A Solar Controller is Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection,with fully 4-stage PWM charge management.
Specification
MODEL | RTD-10A | RTD-20A | RTD-30A | RTD-2048 | RTD-3048 | ||
Batt voltage | 12V/24V auto | 48V | |||||
Charge current | 10A | 20A | 30A | 20A | 30A | ||
Discharge current | 10A | 20A | 30A | 20A | 30A | ||
Max Solar input | <50V | <80V | |||||
Equalization | B01 sealed | B02 Gel | B03 flood | ||||
14.4V | 14.2V | 14.6V | |||||
Float charge | 13.7V(defaul,adjustable) | ||||||
Discharge stop | 10.7V(defaul,adjustable) | ||||||
Discharge reconnect | 12.6V(defaul,adjustable) | ||||||
USB output | 5V/3A | ||||||
Self-consume | <10mA | ||||||
Operating temperature | -35~+60 °C | ||||||
Size/Weight | 150*78*35mm /150g |
Main Features
Application Method
Attention
Connection Order:
Connect the battery with the controller.
Connect the solar panel with the controller.
Connect the load with the controller or inverter.
Disconnection order:
Disconnect the solar panel.
Disconnect the battery.
Disconnect the load.
Precautions:
please make sure connect your inverter with your battery
Please avoid to install in the following environments wet,dusty places or places with flammable and explosive gases.
Install the controller at the vertical plane.
General Pakage
Product List | |
RTD-30A Solar Controller | 1 pcs |
Instructions | 1 pcs |
Packaging Information | |
Size | 9.00*5.00*3.00 / piece |
80cm*35cm*33cm / carton | |
Weight | 0.19kg / piece |
15kg / carton | |
Quantity | 31piece / carton |
Instructions
SAFETY INSTRUCTIONS
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL
it is not suited for nickel metal hydride, lithium ions or other batteries.
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
PRODUCT FEATURES
1.Build-in industrial micro controller.
2.Big LCD display,with 5V USB charger
3. PWM charge management.
4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5.Dual mosfet Reverse current protection ,low heat production.
SYSTEM CONNECTION
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
Images :
Supply Ability
--
Packaging and Shipping
Lead time
--
Port
--
Packaging details
--