Product Specifications

--

Product Description

120kw 150kw 480VDC Input Industrial System VFD off Grid Sine Wave Inverter-high voltage inverters

Technical Features:

1, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of the load.

2, The output frequency can be set, this function is very convenient for customer.

3, The output voltage can be set between +20 % to -40 % of rated voltage. It's a great convenience to users.

4, The DC input voltage range can also be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be set via the LCD panel. Convenient for increasing or reducing the quantity of batteries, photovoltaic modules also can be used flexibly.

5, Pure sine wave output. with good transient response less than 40MS, little harmonic distortion, higher conversion efficiency and stable output voltage.

6, Powerful data display and fault instruction function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.

7, Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.

8, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-500V or 200-850V.

9, Product have passed the European CE (EMC and LVD) certificated and accredited by Australia CEC energy network.

We can make products according to your requirements.

Above parameter only for reference ,could be custom made to user specifications.

also you can optional "dry contact control "start the generator.

1, the first normal open dry contact control generator start, when the inverter shuts off from low DC voltage, 

the dry contact into normal closed status to start your generator.

2, the second normal closed dry contact, when the battery voltage recover to normal, 

the inverter start to work and the normal closed dry contact disconnected, can be used to stop the generator.

In a word,we can do according to your requirements.

100-400V or 300-600V or 400-800V wide input for without battery and controller system

Why choose Bangzhao electric:

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--