Product Specifications

--

Product Description

10A Tracer-1215BN MPPT Solar charge controller

Overview

The Tracer-1215BN is based on common negative design and advanced MPPT control algorithm, with die-cast aluminum design for heat dissipation, products in this series are artistic, economical and practical.

With MPPT control algorithm, in any situation, products of this series can fast and accurately track out the best maximum power point (MPP) of photovoltaic array, in order to obtain the maximum solar energy in time, which remarkably improves energy efficiency. With Modbus communication protocol interface, it is convenient for customers to expand applications and monitor in various fields like telecommunication base station, household system, caravan system, street lighting system, wilderness monitoring system, etc.

All-round electronic fault self-test function and enhanced electronic protection function could furthest avoid damages on system components resulting from installation errors or system failures.

Models:

Tracer1215BN, 10A, 12/24V auto work

Tracer2215BN, 20A, 12/24V auto work

Tracer3215BN, 30A, 12/24V auto work

Tracer4215BN, 40A, 12/24V auto work

Feature:

1)Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%.

2)High quality components, perfecting system performance, with maximum conversion efficiency of 98%. 

3)Ultra-fast tracking speed and guaranteed tracking efficiency.

4)Accurately recognizing and tracking of multiple power points.

5)Reliable automatic limit function of maximum PV input power, ensuring no overload under any circumstance.

6)Wide MPP operating voltage range.

7)Die-cast aluminum design, ensuring excellent heat dissipation characteristic.

8)12/24VDC automatically identifying system voltage or user-defined working voltage.

9)LED indicators showing system status, simple and clear.

10)Multiple load control modes: manual control, light ON/OFF, light On+Timer and time control.

11)Support 4 charging options: Sealed, Gel, Flooded and User.

12)Battery temperature compensation function.

13)Real-time energy statistics function.

14)With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.

15)Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting.

16)Support software upgrade  

Connection:

1) Connect components to the charge controller in the sequence as shown above and pay much attention to the "+" and "-". Please don't turn on the fuse during the installation. When disconnecting the system, the order will be reserved.

2) After installation, power the controller and check the battery indicator on the controller, it will be green. If it's not green, please refer to chapter 4. Always connect the battery first, in order to allow the controller to recognize the system voltage.

3) The battery fuse should be installed as close to the battery as possible. The suggested distance is within 150mm.

4) The Tracer-BN series is a negative ground controller. Any negative connection of solar, load or battery can be earth grounded as required.

When the PV array straight polarity, the actual operation of the PV array must NOT exceed three times of rated charge power, When the PV array reverse polarity, the actual operation must NOT exceed 1.5 times. For real application please refer to the table below:

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--