Product Specifications

--

Product Description

Product Description                                                                                    

·The thickness of the hot dip zinc-steel structure bracket with coating thickness over 60 mm is 2.0 mm or more. Hot dip zinc conforms to GB/ t13912-2002 zinc standard. The support can withstand 0.85kn /m2 of basic wind pressure and 0.6kn /m2 of basic snow pressure, and can withstand a magnitude 7 earthquake. The surface is bright and clean without burrs, rust spots and other defects. Aluminum profile can be assembled quickly on site. The supporting fasteners are made of stainless steel. Meet the site assembly requirements, supporting fasteners used stainless steel materials.

Fixed base profile with standard loader and modular connector. The reliable fixation method is adopted for different working conditions to ensure the safe and reliable use of the support.

The connection design of the photovoltaic module and the installed c-section steel adopts the dismountable structure, and the fixation methods such as bonding and welding are not adopted.

The detachable structural parts are made of non-rusting aluminum alloy, and the connection strength is sufficient to ensure that the pv modules will not fall off under any natural weather conditions. There is a gap between the aluminum joint to guarantee the hot expansion and cold shrinkage between the photovoltaic module and the mounting keel. The keel can be bolted to the reserved hole and connected directly to the lower bracket or roof.

Performance description:

1) the surface passivation treatment is durable, which can effectively prevent the external environment from corroding the profile.

2) the profile structure is shaped according to actual installation, reasonably connected with other parts, convenient for installation and suitable for large-scale projects.

PV Bracket              

Installation                 

Project show              

Company profile       

Payment & Delivery              

We accept OEM and small trial orders, contacting with us now for more information. All

inquiries will be replied within 24 hours.

FAQ                                  

Q1: What are differences among grid-tied, off grid and hybrid solar power system? 

A1: Grid-tied system works based on the national grid. If there is without the national utility, the system can not word. 

Off grid system can word without the national grid, but if there is national grid, which can be a back up power for the off grid system 

Hybrid system, which combine the function of grid-tied and off grid. All in all, it's a grid-tied system, but can also store the power in the battery.

Q2: How about the leading time? 

A2: After receiving deposit, 20-30 days. 

Q3: How many years of warranty for the solar system? 

A3: For the each of accessories, the warranties are different. Solar panel has 10- years linear output warranty and 25years life span. Contorller, inverter and battery has 5-10years warranty years warranty.bracket has 10 years warranty.

Q4: How to design a suitable solar power system? 

A4: Just contact our sales engineer, who will design the full set of solution for you based on your really needs with the most competitive cost.

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--