JNGE 300W 500W 600W 800W 1kw 2kw 3kw 4kw 5kw Pure Sine Wave Inverter for 12V 24V 48V 96V Solar Power System
- Minimal order
- 100 pieces
Message Phone call
Product Specifications
Model Number
Jn-H
Product Description
Delivery time 5-15days and Provide 2% discountOnly for March Purchasing Festival!
Product Introduction
Product Parameter
Power Level | 300W | 500W | 1000W | 2000W | 3000W | 4000W | 5000W | 6000W | |
Rated Power | 300W | 500W | 1000W | 2000W | 3000W | 4000W | 5000W | 6000W | |
Peak Power | 600W(<1S) | 1KW(<1S) | 2KW(<1S) | 4KW(<1S) | 6KW(<1S) | 8KW(<1S) | 10KW(<1S) | 12KW(<1S) | |
Input Voltage | 12V/24V/48V (Can custom) | 12V/24V/48V (Can custom) | 12V/24V/48V (Can custom) | 12V/24V/48V (Can custom) | 24V/48V (Can custom) | 24V/48V/96V (Can custom) | 24V/48V/96V (Can custom) | 24V/48V/96V (Can custom) | |
Output Voltage | 100VAC±5%/110VAC±5%/120VAC±5% or 200VAC±5%/220VAC±5%/240AC±5%(Can custom) | ||||||||
Output Frequency | 50HZ±0.5HZ or 60HZ±0.5HZ | ||||||||
Output Waveform | Pure Sine Wave | ||||||||
Wave form distortion | THD<3%(linear load) | ||||||||
Output Peak Efficiency | Maximum 94% | ||||||||
Starting Mode | Front and back the bipolar soft stat | ||||||||
Switching Time | <=10mS | ||||||||
Switching Way | DC/AC can be automatically set priorities | ||||||||
Cooling | Intelligent air cooled (fan start over 45 degrees) | ||||||||
Protect Function | Under voltage /Overvoltage | LED red light turn on , automatic recovery, buzzer alarm, DC-AC priority automatically switch to the mains, switch indicator light. Automatically restored automatically switch to the inverter power supply, switch indicator light. | |||||||
Over-Load | LED red light turn on , lock, buzzer alarm, DC-AC priority automatically switch to the mains, switch indicator light. Automatically restored automatically switch to the inverter power supply, switch indicator light. | ||||||||
Over-Temperature | LED red light ,self-recovery, buzzer alarm,DC-AC priority automatically switch to the mains, switch indicator light. Automatically restored automatically switch to the inverter power supply, switch indicator light. | ||||||||
Short Circuit | LED red light ,self-recovery ,buzzer alarm, DC-AC priority automatically switch to the mains, switch indicator light. Automatically restored automatically switch to the inverter power supply, switch indicator light. | ||||||||
Input Reverse Connection | Diode, fuse | ||||||||
Working Temperature | -20°--+70° | ||||||||
Stock Temperature | -30°--+75° |
Product Details
Product Packing
Relater Products For Recommendation
30A-60A MPPT solar charge controller 12/24/48V AUTO
Product Parameters
Model | JN-MPPT-B | Default values | |||
Current | 30A | 40A | 50A | 60A | |
System Voltage | 12V,24V,48V | ||||
PV Max input voltage | 20V~100V(12V system Voltage) 40V~150V(suggest lower than 145V)(24Vsystem Voltage) 80V~150V(suggest lower than 145V)(48Vsystem Voltage) | ||||
Rated working current | 30A | 40A | 50A | 60A | |
PV Max input power | 360W/12V 720W/24V 1440W/48V | 480W/12V 960W/24V 1920W/48V | 600W/12V 1200W/24V 2400W/48V | 720W/12V 1440W/24V 2880W/48V | |
MPPT efficiency | >99.5% | ||||
Conversion efficiency | >96% | ||||
Over voltage (over charge) | 16~17V,×nV | 16V,×nV | |||
Over voltage recovery | 15~15.5V, ×nV | 15V,×nV | |||
Charging limit voltage | 15.5~16V, ×nV | 15.5V,×nV | |||
Equalizing charge voltage | 15~15.5V, ×nV | 15.2V,×nV | |||
Boost charge voltage | 14~15V, ×nV | 14.4V,×nV | |||
Boost charge recovery | 12.3~13.5V,×nV | 13.2V,×nV | |||
Floating charge voltage | 13.2~14.0,×nV | 13.8V,×nV | |||
Over discharge voltage | 9.8~11.8V,×nV | 10.8V,×nV | |||
Over discharge recovery | 12.0~13.0V,×nV | 12.6V,×nV | |||
Equalizing charge time | 1/2/3 hour | 1H | |||
Boost charge time | 1/2/3 hour | 1H | |||
Device address | 1~99 | 6 | |||
Light control OPEN voltage | 5~11V | 5 | |||
Light control CLOSE voltage | 5~11V | 6 | |||
Time delay | 10min | ||||
Temperature compensation | 0~4 | 4 | |||
Over temperature protection | When the temperature reaches 75 ºC charging current is limited to half of the rated current, When the temperature reaches 90 ºC charging and load are shut off | ||||
Working temperature | -20ºC~50ºC | ||||
Storage temperature | -40ºC~80ºC | ||||
Weight | 6.5kg |
Product Processing
Project Show
Why Choose Us
FAQ
Q1:Can I get one for sample?
A1:Yes,we accept sample order or trial order for testing first.
Q2:What's the price and MOQ?
A2:Please send me inquiry,your inquiry will be replied whin 24 hours ,we will let you know the latest price and MOQ.
Q3:What's your delivery time?
A3:It depends on your quantity,but usually,3-5 days for sample order,15-30 days for batch order.
Q4:How about your payment and shipment?
A4:Payment:We accept T/T,Western Union,Paypal etc.terms of payment.
Shipment:For sample order,we use DHL,TNT,FEDEX,EMS,etc.,for batch order,by sea or by air(through our forward)
Q5:How about your warranty?
A5:Normally,we provide 1 years warranty,and whole life technical support.
Q6:Do you have your own factory?
A6:Yes,we are leading manufacturer mainly in off grid solar power inverter,solar charge controller and systems ect.for about 12 years.Our factory is located in Hefei,Anhui,China.
Contact Us
Ms.Sunny Tao
Anhui JNGE Power Co.,LTD.
Official website: jngepower.en.made-in-china.com
Supply Ability
--
Packaging and Shipping
Lead time
--
Port
--
Packaging details
--