* Meters * Motor bearings

* Nylon bushings * Rubber bushing

* Tools

This colorless, odorless product lubricates, waterproofs and protects metal and non-metal surfaces with a thin, non-staining film of silicone. It is an excellent lubricant and protectant for molds, motor bearings, linkages, tools, meters, locks and other equipment. The low surface tension of silicone spray results in excellent coverage and deep penetrating for metal and non-metal surfaces, it is non-corrosive and non-staining. Aristo silicone spray remains effective at temperature ranging from 40°F to 400°F.

2. Leaving perfect surface of the product, without oiliness.

3. Non-toxic and non-corrosive.

4. Allow for a maximum number of mold releasing cycles, saving on the cost.

5. High-pressure cans are used, safe for use.

6. Suitable for use as plastic mold release for ABS, PVC, PE, NYLON, ACRYLICS, PS, PP, PC and SAN products.

Directions for use:

1. When it is used for the first time, make sure the molds have been cleaned using mold contaminant remover, and dried or aired to dry.

2. When spraying it, the nozzle should be at a distance of about 20-25cm with respect to the mold.

3. When it is used for the first time, it should be sprayed on the molds for three rounds, and in such a way that the application is thin and even. Each round of spray should commence a few seconds after previous spray, so that each layer is dry enough, after the third round of spray, heat the molds to 150℃, and leave them to stand at this temperature for 15-30minutes before the normal production starts.

4. Re-spray this product when necessary in the manufacturing process.

Handling Precautions:

1. This product is flammable, the storage temperature shall be lower than 50℃ with good ventilation

2. When store this product for long time, the height don’t excess 8cartons

3. Handle with care, don’t throw or strike this product.

4. Keep away from heat, flames, sparks and any other source of ignition.

5.  No upend the product and keep out reach of children.

Per IMDG and local Marine & Transportation laws requirement, aerosol can be only shipped as dangerous cargo in full container, LCL shipment is risky and dangerous, for LCL shipment, we prefer to work under EXW Factory term rather than FOB or CFR per Incoterm 2000.

Q: Can you produce OEM brand?

A: Besides Aristo brand, we also provide OEM and ODM services which including some big names in the Paint, Auto, Industrial areas. 

Q: What is the MOQ?

A: For OEM brand, the MOQ is 1X20GP; for Aristo brand, the MOQ is 6000cans/item.

Q: How do you transport your cargo?

A: Because our products are aerosol and flammable, they are declared as DANGEROUS CARGO, CLASS 2.1, UN1950. According to IMDG CODE, all DG cargo should be shipped by FCL in DG container. Otherwise, the consignor will be fined at least USD8000.00, while destination customs clearance may have risks and problems.

Q: Can we get free sample?

A: 1~2 cans free sample without can printing is no problem, but the DG cargo delivery cost should be paid by clients first and will be refund back in the first container deal.