Product Specifications

--

Product Description

30A 12V/24V Instruction to Solar Charge Controller Light+Timer Control S30

S30-30A / S60-60A / S80-80A

Specification

Attention

Connection Order: 

1.Connect the battery with the controller. 

2.Connect the solar panel with the controller. 

3.Connect the load with the controller or inverter. 

Disconnection order: 

1.Disconnect the solar panel. 

2.Disconnect the battery. 

3.Disconnect the load. 

Precautions

1.please make sure connect your inverter with your battery 

2.Please avoid to install in the following environments wet,dusty places or places with flammable and explosive gases. 

3.Install the controller at the vertical plane.

General  Pakage

Instructions

Pacakge Included:

1. 1pcs 30A solar Controller

2. 1pcs user manual

3. 1pcs temp senor

Ideal for

For 12V PV system: 24V for Max input,360W Solar Panel.

For 24V PV system :48V for Max input,720W Solar Panel

This controller has Light and Timer control Function

Light control:When daylight starts to occur then the light source goes off. Meanwhile the Solar Panels will charge the batteries. when there is no sunlight the garden light will switch on.

Time control:There is an eight hours time control,that means it will go off when the Lights automatically switch off after 0-15 hours.

This Solar30 Solar controller is a kind of intelligent and multifunctional solar charge controller. These serial products adopt customized LCD display screen, which makes the operation on the interface rather convenient. All the controlling parameters can be reset flexibly to satisfy your different needs.

Function

1.Image of LCD graphic symbol   

2.Automatic Identification System Voltage level

3.Automatic Temperature Compensation

4.Settable Operating mode of Load

5.Remote monitoring and control function (custom)

6.Battery Low Voltage Disconnection (LVD)

7.Accumulated function of charge and discharge Ampere hours

8.Simple button operation

9.Intelligent PWM charge mode

10.Adjustable charge-discharge control parameters

11.Overload, Short Circuit Protection

12.Battery reverse-discharge protection

13.Battery reverse connection protection 

Installtion cable area:  7# AWG ( 16mm2)Installation Data:

Operation temperature: -10ºC~ 60ºC

Storage temperature :-30ºC~ 70ºC

Humidity requirement &colon;<90&percnt; &comma; no condensation

Size&colon; 90mm&ast;188mm&ast;48mm

Mounting hole spacing &colon;60 mm 178 mm --5

Weight&colon; 360g

Data Sheet 

Model Solar30 

Rated Current 30A

Rated Voltage 12V&sol;24V 

Maximum Voltage of solar panel <48V 

Float Voltage 13&period;8V&sol;27&period;6V 

Low Voltage Disconnection 10&period;7V&sol;21&period;4V 

Low Voltage Reconnection 12&period;5V&sol;25V 

No load loss <30mA

loop voltage drop <200mV

Charging Mode PMW Mode

Temperature Compensation -4mV&sol;Cell&sol;ºC

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--