Product Specifications

Type

DC to DC

Product Description

10W 20W Portable Solar Energy /Power System with Charge

The DC Power System combines controller with built-in battery(optional) all in one and output DC voltage, using for small power load, such as phone, computer, LED light, etc.. It has the portable, easy operating, safe characteristics. Now, SNAT has 5 models of this series, DL-7AH, DL-12AH, DL-24AH, DL-50AH, DL-100AH with 12VDC output ports and 5VDC USB output ports. 

This system uses PWM charging mode and the inner temperature sensor, charging efficiency is 3%-6% higher than non-PWM and increasing power consumption time.

What's more there are many protecting measures, such as short circuit, overload, unique reverse, shut off automatically when the battery full of or discharge, and then restore, etc..

OEM/ODM ACCEPTED

DL-7AH

Product Size:  L*W*H=193×96×136mm

Package Size: L*W*H=237×147×178mm

DL-12AH

Product Size:  L*W*H=193×126×156mm

Package Size: L*W*H=237×177×198mm

DL-24AH

Product Size:  L*W*H=234×163.6×244mm

Package Size: L*W*H=298×235×285mm

DL-50AH

Product Size:  L*W*H=288×175.6×279mm

Package Size: L*W*H=348×245×320mm

DL-100AH

Product Size:  L*W*H=383*213*300mm

Package Size: L*W*H=460*290*365mm

Product Display

DL solar power back up is convenience for outdoor, Camping, Ship, Emergency, Island and ect:

7. Laptop charging and ect..

Technical Parameters

• 1.Battery level

• When turn on power switch 'Battery Switch', the built-in solar  controller starts to work, the Battery indicator on the panel "25% - 50% - 75% - 75%"

  2.Battery(Power) switch

  To turn the power on/off (Tip: If this equipment is not used for a long without connecting solar panels, must turn off the "power switch")

  3.Two 12VDC Output ports

  4.Battery discharge lamp &Charge lamp

  When the system is normally connected to the solar panel, the charging status indicator "CHA" is steady green light, indicating that the system charging circuit is normal.

  When the battery voltage is within the normal range, the discharge status indicator "CHA" is steady orange light.

  5.USB 5VDC Output ports

  6.Solar panel interface

Company profile

• The product applies to diversified loads because its digital design,pure sine wave output and excellent overcurrent protection can withstand the loads with a large starting current; the product is provided with independent solar three-stage charge management to improve charge efficiency of its battery and realize a longer life;the product provides universal 5VDC-USB output port and 12VDC output to be widely applied to a small solar power generation occasions including families,schools,street monitoring,forest monitoring,industrial and mining enterprises,frontier defense,sea islands,pasturing areas,etc
•  
• Solar Generator Solar Power System PV Array Combiner Box for Home based on an MCU intelligent control technology, the product realizes solar charge and discharge management for batteries for longer lives of systems

• Portable solar power system 12v 12ah 20w with 5w USB & 12v dc led light

• SCM intelligent control and optimization SOC algorithm;
• Built-in temperature sensor which can improve charge fficiency of the built-in battery effectively;
• Full-automatic control such as overcharge protection,overdischarge protection,electronic circuit short circuit protection,overload protection and unique reverse connection prevention;
• A serial-connection PWM charge main circuit which makes voltage loss of the charge circuit less than that of the charge circuit of a diode by nearly half and the charge efficiency 3% to 6% higher than a non-PWM charge main circuit and increases the time of power consumption;
• A longer life contributed by automatic control modes including boosting charge for recovery from overdischarge,normal direct charge and floating charge;
• Visualized display of the system status by nixie tube and LEDs.
•  
• Company Information
•  Foshan SNAT Energy Electrical Technology Co. Ltd, established in 2004. As a world's leading supplier for solutions for electric energy and new energy, SNAT has powerful strength and is engaged in field of solar inverters, solar inverters with built-in solar controller, solar controllers, UPS, which are used for household, telecommunication, electricity, infrastructure and industrial markets. At the same time, our company is concurrently engaged in solar panels, batteries for solar power system. All products purchased by our company have our warranty commitment, parts will be shipped for free during warranty period. We have professional technical team and are focus on customers' demands.
• We support OEM/ODM service. As a professional factory and state of the advanced equipment allow us to have the capability to design and manufacture a wide range of new items according to the buyer's requirements.
•  
• Product Recommended

• Company Certification:

• FAQ

  Q1: What is the warranty of your product?

  A1: Quality warranty for 12 months; parts will be shipped free during warranty period.

  Q2: Can you do OEM or ODM?

  A2: Yes, we can offer the OEM or ODM service.

  Q3: What is your delivery time?

  A3: Within 5 day after receive advanced payment.

  Q4: What minimum order do you require?

  A4: 1 piece.

  Q5: Why choose us?

  A5: 1) Prompt delivery and good after-sale services.

        2) We have our own factory, the selling prices is competitive.

        3) All of our products have CE certification, ISO9001:2008, RoHS.

        4) 80% new materials for production and superior quality.

        5) Professional engineer designers.

  Q6: Quality Service?

  A6: Any inquiry replied within 12 hours.

        Any problem resolved within 24 hours.

  Please feel free contact us for more information!

  Warmly welcome to visit our factory in Foshan city of China. 

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--